Bidragon
DWF Series Chili Mesh Belt Dryer
DWF Series Mesh Belt DRYER Applications:
DWF mesh-belt dryer is continuous drying equipment, the machine is used for drying the piece, strip and particle shape materials with good ventilation. The machine is suitable for the materials, such as de-watering vegetable, herbal traditional Chinese medicine and others, for which the water content rate is high and high temperature is not allowed. The machine owns advantages that its drying speed is fast, the evaporation strength is high and the product quality is good. To de-watering filtering cake state paste material, after granulating it to strip-type, could be dried also.
Features:
1. The amount of air, temperature of heat, stay time and raw material can be adjusted in order to get the best effect.
2. The moisture of finished product can be adjusted. The belt type will be choose, such as matral mesh or vibrated plate.
3. The belt can be clean, because the heating room is separated from drying room.
4. According to requirements, the low plate can be equipped cleaning equipment to remove a little of raw material to outlet.
5. According the moisture of raw material, customer can choose multi-set to establish.
Technique Parameters:
| Type | DWF-1.2-8 | DWF-1.2-10 | DWF-1.6-8 | DWF-1.6-10 | DWF-2-8 | DWF-2-10 |
| Unit Number | 4 | 5 | 4 | 5 | 4 | 5 |
| Belt Width(m) | 1.2 | 1.2 | 1.6 | 1.6 | 2 | 2 |
| Drying Section Length(m) | 8 | 10 | 8 | 10 | 8 | 10 |
| Thickness of the Material(mm) | 10-80 | |||||
| Temperature(℃) | 60-150 | |||||
| Steam Pressure(MPa) | 0.2-0.8 | |||||
| Steam Consumption(Kg/h) | 120-300 | 150-375 | 150-375 | 170-470 | 180-500 | 225-600 |
| Drying Time(h) | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 | 0.2-1.2 | 0.25-1.5 |
| Drying Strength(Kg H2O/h) | 60-160 | 80-220 | 75-220 | 95-250 | 100-260 | 120-300 |
| Total Power of the Blower(KW) | 8.8 | 11 | 12 | 15 | 16 | 20 |
| Total Power of the Equipment(KW) | 10.1 | 12.3 | 13.3 | 16.3 | 17.3 | 21.3 |
BCH200 Chili Grinder Machine Newly Updated 
Leave a comment